Highlighted
ultraxmode
Bronze

Cannot get Dell N2024 to work.

Greets everyone!

I have a new Dell N2024 (no Dell switch experience whatsoever). I connect my PC to it via CLI cable and run Putty. Everything ok. Connected.

Initial configuration asks me about :

SNMP community : public

Management IP : 0.0.0.0

VLAN1 routing interface : 10.18.28.9 , 255.255.255.128

Default Gateway : 0.0.0.0

I also put in the admin user (username and password with privilege 15) 

 

...and I save the configuration. 

 

So.. I try to ping 10.18.28.9... no response.

I try to login via web (http://10.18.28.9) .... no response

Scan the network with an app.. no response. 

 

The switch is connected to the network via port 1 (it blinks like its ok). I run the "show ip interface" and I get "Vl1 Up 10.18.28.9 255.255.255.128 Manual"

 

What is happening? I cant find it.. 

 

Thank you very much, in advance.

 

PS : I save the configuration, restarted.. nothing. 

 

 

0 Kudos
3 Replies
Moderator
Moderator

Re: Cannot get Dell N2024 to work.

Hi,

Can you Private message me the service tag so we can get some additional device information?

 

Have you tried to set a management IP and default gateway?

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
ultraxmode
Bronze

Re: Cannot get Dell N2024 to work.

Thank you for the reply,

I followed this procedure --> http://www.dell.com/support/article/us/en/04/how10399/how-to-set-up-management-access-for-the-n2000-...

but nothing.. I cannot even ping my switch.. 

0 Kudos
remy-ch
Bronze

Re: Cannot get Dell N2024 to work.

Can you run "sh arp"  and "sh lldp nei" under the switch console and put the ouput here ?

 

0 Kudos