Unsolved
22 Posts
0
1227
Dell Force10 S4810 compatibility with cisco 2960
i just wanted to know how hard is it to use Cisco 2960 as access switches with Dell Force10 core switch. how hard is it when it comes to configuration and deployment.
thank you
GoKiwi64
19 Posts
0
September 30th, 2019 23:00
I have multiple 2960X connected to my 4048's.
Not too hard at all . In my case I made sure the Dell's were running RSTP and had correct priorities to make the the root bridge, Used lacp to form the trunk ports.
Te 1/21 Test Cisco Up 1000 Mbit Full --
interface TenGigabitEthernet 1/21
description Test Cisco Switch
no ip address
!
port-channel-protocol LACP
port-channel 21 mode active
lacp port-priority 1
no shutdown
interface Port-channel 21
description Test Cisco Switch
no ip address
portmode hybrid
switchport
lacp long-timeout
vlt-peer-lag port-channel 21
no shutdown
LLDP
Te 1/21 Test_Cisco...Gi1/0/25