Unsolved
58 Posts
0
1484
Dell PowerEdge M1000e
I have M1000e with two Mxl Switches. to be configured as converged Flex IO and FCoE.
the MXL's will go to LAN and to SAN Switches Cisco from Dell.
is there any white papers for configuring the MXL switches and Zoning on Cisco Fiber Switches.
DELL-Josh Cr
Moderator
Moderator
•
8.4K Posts
0
February 11th, 2019 07:00
Hi,
This was the closest I could find. https://downloads.dell.com/solutions/general-solution-resources/White%20Papers/Deploying%20Dell%20Networking%20MXL-MIOA%20into%20a%20Cisco%20Nexus%20Network.pdf
Tqadi
58 Posts
0
February 13th, 2019 01:00
Tqadi
58 Posts
0
February 18th, 2019 13:00
hello,
i have been through much documents:
i have configured the MXL switches with FCoE DCB.
what is needed on Qlogic card config on servers when we don't boot from san. **bleep**
and what is needed to be confogured on Cisco MDS. Zoning. all WWPN zoning or enabling NPID and craete zone and zoneset only