Unsolved
73 Posts
0
1326
Dell X4012 best practice for connecting 3 XC Poweredge for HCI Nutanix
Good afternoon All
I am new to Nutanix and I am struggling with how the network infrastructure goes together, maybe because I have used VMware, Equallogic and Dell for years and the Nutanix is a new concept.
Could anyone start me off with a configuration for the Dell X4012 and the relevant Vlans I will need for the 3 x Dell XC servers? Any tips, tricks, best practices would be gratefully received.
Many thanks
Eric
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
May 1st, 2018 05:00
I could not find any deployment guides specific to this kind of setup, but here is what I was able to find.
Here is a link where I list out the available KB articles, white papers, and user guide links for the X-series. These should help with overall configuration of the switch.
https://dell.to/2HGPEzL
Here is a networking deployment guide and best practices for the XC servers. While it does not have the X-series listed, the fundamentals should still be applicable.
Hope this helps
1 Attachment
XC_Series_Networking_Guide_v2.0.pdf
Jaxon62
73 Posts
0
May 1st, 2018 15:00
Hi Daniel
I can't find a reply option for the message you sent me.
Service Tag – for Dell XC730D
The x4012 switch tag, I will have to go to site for the tag number as I don't seem to have it written down.
Thank you for the link I will check that out in the morning.
Cheers
Eric