DKLoki
1 Nickel

Determine which NIC is going through which M6220 in a blade enclosure

Jump to solution

I've got an M1000e blade enclosure with pass through modules for the 'A' fabric, and M6220 switches for the 'B' fabric

Each blade has a mezzanine card with 2x1GB ports and I am trying to determine which port is attaching to which switch.

I can't find a command for the switch CLI that will show me the mac addresses of the server NICs that are connected to that particular switch.

on a cisco switch, I'd do something like show mac_address_table, but there doesn't appear to be a similar command for these m6220s

 

Anyone have a suggestion?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
bh1633
3 Argentium

Re: Determine which NIC is going through which M6220 in a blade enclosure

Jump to solution

show bridge address-table

2 Replies
Highlighted
bh1633
3 Argentium

Re: Determine which NIC is going through which M6220 in a blade enclosure

Jump to solution

show bridge address-table

DKLoki
1 Nickel

Re: Determine which NIC is going through which M6220 in a blade enclosure

Jump to solution

Thank you-

that command gave me the information I needed.

 

 

0 Kudos