3 Posts
0
916
How to check and disable TLS 1.0 and 1.1 on Dell PowerSwitch N3200-ON series?
How do I check the current configuration and how do I disable TLS 1.0 and 1.1 on the switch above? Newbie here, would appreciate a feedback.
3 Posts
0
916
How do I check the current configuration and how do I disable TLS 1.0 and 1.1 on the switch above? Newbie here, would appreciate a feedback.
Top
DELL-Young E
Moderator
Moderator
•
3.6K Posts
0
November 22nd, 2022 18:00
Hi,
Please upgrade to the latest version. (6.8.x.x)
https://dell.to/3EVRBbC
This is the firmware file to be upgraded.
DELL-Young E
Moderator
Moderator
•
3.6K Posts
0
November 21st, 2022 22:00
Hi, thanks for choosing Dell.
# show running-config
#show startup-config
--------------------------------------------
N3248PXE-ON(config)configure
N3248PXE-ON(config)#no ip http secure-protocol TLS1.0 TLS1.1
N3248PXE-ON(config)#exit
N3248PXE-ON#write memory
Syed Zaidi
3 Posts
0
November 22nd, 2022 06:00
Thank you for your response but the command "no ip http secure-protocol TLS 1.0 TLS 1.1" gives out an error "Invalid Input".
DELL-Charles R
Moderator
Moderator
•
3.2K Posts
0
November 22nd, 2022 07:00
Hello Syed Zaidi,
What is the OS version running on the switch?
I think this is what Young was referencing. It is for OS6.8
no ip http TLS1.0 TLS1.1
https://dell.to/3OwDVXF
Page 2488
ip http secure-protocol { [TLS1.0] [TLS1.1] }
no ip http secure-protocol
secure-protocol – A list of one or more protocol versions.
You may also try in inline help ?
Syed Zaidi
3 Posts
0
November 22nd, 2022 07:00
Below are the OS details.
Dell EMC Networking N3248P-ON, 6.7.1.1,
Linux 4.15.18-d60bb35b