Unsolved
This post is more than 5 years old
2 Posts
0
22307
April 4th, 2008 09:00
Jumbo Frames with PowerConnect 6248
Hello,
does anyone know how to enable jumbo frame with PowerConnect 6248 using DellOpenManage. I have no problem with PowerConnect 5324 (Menu System > Advance Settings > General Settings).
Does the 6248 is really jumbo frames supported?
Thank you.
Sylvain
No Events found!
sentinel-master
345 Posts
0
April 4th, 2008 18:00
You should see under the Menu -->
Advanced Settings -->
MaxLog Entries
Jumbo Frames
With Current & After Reset............are you not seeing these options ?
mandzo
53 Posts
0
April 7th, 2008 17:00
The only place I found is:
<>Switching -->
<> Ports -->
<> Port Configuration -->
<> and you could specify Maximum Frame Size <>
SJ_ECLAIR
2 Posts
0
April 8th, 2008 06:00
Thanks mandzo, I didn't find it.
cytexone
1 Message
0
April 16th, 2008 16:00
bh1633
909 Posts
0
April 22nd, 2008 13:00
the 62xx switch support different framesize per port. So the configuration is on the port configuration page.
The 5324 switch supports jumbo frame configuration at the switch level only, not per port.