MikkelN
1 Copper

MLAG peer link portchannel inactive link

Hi everyone, 

I have configuered MLAG between my two Dell N3048 switches and it's up and running. 

The issue is, i'm using both Ten gigabitethernet ports for the port channel that establishes the peer link, but it's only one interface that's active in port-channel. Is there any limitations on having more than interface in the peer link channel? 

DH-SW01(config)#show interfaces port-channel 10

Channel Ports Ch-Type Hash Type Min-links Local Prf Rx Util Tx Util
------- ----------------------------- -------- --------- --------- --------- --------- ---------
Po10 Active: Te1/0/1 Dynamic 7 1 Disabled 0 0
Inactive: Te1/0/2

 

0 Kudos
3 Replies
Moderator
Moderator

Re: MLAG peer link portchannel inactive link

Hi,

You should be able to use multiple links for peering. https://downloads.dell.com/manuals/common/powerconnect_nx00-usingmlag-whtppr_en-us.pdf Page 11. Is the firmware up to date?

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
MikkelN
1 Copper

Re: MLAG peer link portchannel inactive link

Hi Josh, 

I'm not able to see the webpage which you have linked. 

 

0 Kudos
MikkelN
1 Copper

Re: MLAG peer link portchannel inactive link

And yes i have updated the firmware to latest. 

 

0 Kudos