Highlighted
Coops7
6 Indium

Mimic Powerconnect 5548 config to N2048

Hi all, I am trying to mimic an old Powerconnect 5548 stacking config to an N2048. It has been a CLI battle with the different code bases and commands but I am close with a few outstanding issues: Server VLAN - 192.168.0.254 - PC VLAN 192.168.3.254 - DHCP server is a Windows server on 192.168.0.1 with 192.168.0.0 and 192.168.3.0 scopes. * currently anything plugged into a VLAN3 port does not get DHCP nor can it reach the VLAN1 subnet so there appears to be something I am missing with inter-VLAN connectivity/routing. VLAN1 ports get DHCP. * testing switchover, the internet (leased line router) is patched to gigabitethernet1/0/48 which is just a P2P VLAN2 port but no internet is present on any port. I believe I have added the required static route of the router. Any help would be greatly appreciated. I have each of the config files. david
Labels (1)
0 Kudos
6 Replies
Moderator
Moderator

Re: Mimic Powerconnect 5548 config to N2048

Hi,

DHCP relay should help. Page 336 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd...

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Coops7
6 Indium

Re: Mimic Powerconnect 5548 config to N2048

Thanks Josh - is there a way I can upload the configs for you to possibly glance over?

0 Kudos
Moderator
Moderator

Re: Mimic Powerconnect 5548 config to N2048

The easiest way is to upload it somewhere and post the link.

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Coops7
6 Indium

Re: Mimic Powerconnect 5548 config to N2048

Thanks Josh, here goes...2 x configs zipped

0 Kudos
Moderator
Moderator

Re: Mimic Powerconnect 5548 config to N2048

Are you still having issues with dhcp? Nothing stood out as wrong in the config.

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Coops7
6 Indium

Re: Mimic Powerconnect 5548 config to N2048

Thanks for looking Josh. I am next at the customer site on Monday.

I have applied the changes via CLI on a machine I have in the Server Room but to fully test I need to be physically there.

Much appreciated!

0 Kudos