Unsolved
1 Rookie
•
107 Posts
0
759
N2000 Series - dns config - very often log entry DNS_CLI[dnsTask]: dns_client_util.c(1772) 1812 %% DBG DNS Client: no ipv4 or
Hi there,
somehow my stack is delivering every 10 seconds this dns event:
DNS_CLI[dnsTask]: dns_client_util.c(1772) 1812 %% DBG DNS Client: no ipv4 or ipv6 address found in response for request id
any idea how i can get rid of this entries since the log gets stuffed a lot with this.
i have set valid values for this
ip domain-name "xxxl"
ip name-server "x.x.x.x"
ip name-server "x.x.x.x"
ip name-server "x.x.x.x"
And the Switch can resolve dns names
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
October 22nd, 2021 07:00
Hello @White_Ninja,
What firmware version are you using? Is the switch still in warranty?
Regards.
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 25th, 2021 01:00
hi firmware is 6.7.1.1 and the switches are in warranty
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
October 25th, 2021 06:00
Ok, @White_Ninja, then I suggest you to open a ticket with phone support because most probably they will need to have a log exported and check the log.
Both to check if there is a hardware malfuncion or, in case it is a configuration, they might not be able to perform the cofiguration on your behalf but they could point you to the right direction.
In bot cases, a log analysis would be required.
Regards.
iscnata
1 Rookie
1 Rookie
•
1 Message
0
March 12th, 2024 17:13
Hi!
I know this was 3 years ago, but I was thinking if you got this issue fixed. Were you able to fix it?