Unsolved
14 Posts
0
3267
N3024 ports down
Good morning everyone
I just want to know?
how to show that this equipment and its ports are damaged or there is some way to fix this disaster?
thank you all for your collaboration in advance
this is the #show interface status output
Gi2/0/1 5 N/A Unknown Auto Down Inactive
Gi2/0/2 5 N/A Unknown Auto Down Inactive
Gi2/0/3 5 N/A Unknown Auto Down Inactive
Gi2/0/4 5 N/A Unknown Auto Down Inactive
Gi2/0/5 5 N/A Unknown Auto Down Inactive
Gi2/0/6 5 N/A Unknown Auto Down Inactive
Gi2/0/7 5 N/A Unknown Auto Down Inactive
Gi2/0/8 5 N/A Unknown Auto Down Inactive
Gi2/0/9 5 N/A Unknown Auto Down Inactive
Gi2/0/10 5 N/A Unknown Auto Down Inactive
Gi2/0/11 5 N/A Unknown Auto Down Inactive
Gi2/0/12 5 N/A Unknown Auto Down Inactive
Gi2/0/13 5 N/A Unknown Auto Down Inactive
Gi2/0/14 5 N/A Unknown Auto Down Inactive
Gi2/0/15 5 N/A Unknown Auto Down Inactive
Gi2/0/16 5 N/A Unknown Auto Down Inactive
Gi2/0/17 5 N/A Unknown Auto Down Inactive
Gi2/0/18 5 N/A Unknown Auto Down Inactive
Gi2/0/19 5 N/A Unknown Auto Down Inactive
Gi2/0/20 5 N/A Unknown Auto Down Inactive
Gi2/0/21 5 N/A Unknown Auto Down Inactive
Gi2/0/22 5 N/A Unknown Auto Down Inactive
Gi2/0/23 5 Full 1000 Off Down Inactive
Gi2/0/24 5 Full 1000 Off Down Inactive
Te2/0/1 trnk Full 1000 Auto Up Inactive
Te2/0/2 trnk Full 1000 Auto Up Inactive
Tw2/0/1 N/A N/A N/A N/A Detach N/A
Tw2/0/2 N/A N/A N/A N/A Detach N/A
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 31st, 2018 07:00
Are you referring to ports 23 and 24? Have you taken a look at the config? Please feel free to post up the config, I can help look through it. Tried different cable? different port? What devices plug into these interfaces?
Any additional information you can provide will be very helpful. Information such as the environment, behavior being observed, and any troubleshooting you have already done.
ramiro_alfredo
14 Posts
0
July 31st, 2018 09:00
no, I mean all the g-ports.
thnks in advance Daniel-co
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 31st, 2018 10:00
What do you have plugged into these ports? Is this a new deployment? Are there any lights on the ports? Anything recorded in the logs? # show logging
ramiro_alfredo
14 Posts
0
July 31st, 2018 11:00
for some reason i cant post the show logging output
ramiro_alfredo
14 Posts
0
July 31st, 2018 11:00
today #show logging output
<190> Jul 31 02:03:37 192.168.40.53-1 CKPT[123740684]: ckpt_task.c(423) 1048 %% Checkpoint operation to backup unit 2 complete.
<190> Jul 31 02:03:37 192.168.40.53-2 BOXSERV[123900524]: boxs.c(461) 1047 %% Error 1 occurred reading thermal sensor 0 data
<190> Jul 31 02:03:37 192.168.40.53-1 CKPT[123740684]: ckpt_task.c(523) 1046 %% New backup manager selected, unit 2.
<189> Jul 31 02:03:36 192.168.40.53-1 TRAPMGR[123750604]: traputil.c(740) 1045 %% Stack Port Link Up: Index: 201 Unit: 2 Tag: 0/28
<189> Jul 31 02:03:36 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1044 %% Unit 2 is added to the stack
<189> Jul 31 02:03:20 192.168.40.53-1 TRAPMGR[123750604]: traputil.c(740) 1043 %% Stack Port Link Up: Index: 100 Unit: 1 Tag: 0/27
<190> Jul 31 02:03:20 192.168.40.53-1 CLI_WEB[124304596]: cmd_logger_api.c(260) 1042 %% [CLI:----:EIA-232] User ---- logged in to enable mode.
<189> Jul 31 02:03:18 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1041 %% Unit 1 identified a link failure in the stack. 0/27
<189> Jul 31 02:03:18 192.168.40.53-1 TRAPMGR[123750604]: traputil.c(740) 1040 %% Stack Port Link Down: Index: 100 Unit: 1 Tag: 0/27
<189> Jul 31 02:03:18 192.168.40.53-1 TRAPMGR[123750604]: traputil.c(740) 1039 %% Stack Port Link Up: Index: 100 Unit: 1 Tag: 0/27
<189> Jul 31 02:02:52 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1038 %% Entity Database: Configuration Changed
<189> Jul 31 02:02:45 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1037 %% Unit 2 is removed from the stack
<190> Jul 31 02:02:45 192.168.40.53-1 VOIP[123740684]: voip_ckpt.c(174) 1036 %% Backup unit gone
<190> Jul 31 02:02:45 192.168.40.53-1 CKPT[123740684]: ckpt_task.c(487) 1035 %% Backup manager removed.
<190> Jul 31 02:02:45 192.168.40.53-1 UNITMGR[123900524]: unitmgr.c(7244) 1033 %% No Potential unit to configure as Standby when unit 2 left
<189> Jul 31 02:02:35 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1032 %% Unit 1 identified a link failure in the stack. 0/27
<189> Jul 31 02:02:35 192.168.40.53-1 TRAPMGR[123750604]: traputil.c(740) 1031 %% Stack Port Link Down: Index: 100 Unit: 1 Tag: 0/27
<186> Jul 31 02:02:28 192.168.40.53-2 General[123900524]: unitmgr.c(6362) 1030 %% Event(0x0)
<184> Jul 31 02:02:28 192.168.40.53-2 UNITMGR[123900524]: unitmgr.c(6343) 1029 %% Reset initiated on unit 2, reason: User Request
<190> Jul 31 02:02:04 192.168.40.53-1 UNITMGR[123896556]: unitmgr.c(6794) 1028 %% Copy of running configuration to backup unit complete
<189> Jul 31 02:02:00 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1027 %% Unit 1 has finished the copy operation successfully
<189> Jul 31 02:02:00 192.168.40.53-1 TRAPMGR[123877420]: traputil.c(697) 1026 %% 'startup-config' has changed.
<190> Jul 31 02:02:00 192.168.40.53-1 UNITMGR[124304596]: unitmgr.c(6663) 1025 %% Configuration propagation successful for config type 0
<190> Jul 31 02:01:56 192.168.40.53-1 CLI_WEB[124304596]: cmd_logger_api.c(260) 1024 %% [CLI:admin:172.16.0.186] Copy file running-config to startup-config
<189> Jul 31 02:01:50 192.168.40.53-1 DRIVER[124304596]: l7_usl_bcmx_port.c(3575) 1023 %% Failed to set green ether auto power down mode for gport 134219800, hwRv -16 dbRv 0
<189> Jul 31 02:01:50 192.168.40.53-2 DRIVER[123900524]: l7_usl_bcm_port.c(4228) 1022 %% Failed to set green ether auto power down mode for gport 24, rv -16 mode:2
<189> Jul 31 02:01:50 192.168.40.53-1 DRIVER[124304596]: l7_usl_bcmx_port.c(3575) 1021 %% Failed to set green ether auto power down mode for gport 134219799, hwRv -16 dbRv 0
<189> Jul 31 02:01:50 192.168.40.53-2 DRIVER[123900524]: l7_usl_bcm_port.c(4228) 1020 %% Failed to set green ether auto power down mode for gport 23, rv -16 mode:2
<189> Jul 31 02:01:50 192.168.40.53-1 DRIVER[124304596]: l7_usl_bcmx_port.c(3575) 1019 %% Failed to set green ether auto power down mode for gport 134219798, hwRv -16 dbRv 0
<189> Jul 31 02:01:50 192.168.40.53-2 DRIVER[123900524]: l7_usl_bcm_port.c(4228) 1018 %% Failed to set green ether auto power down mode for gport 22, rv -16 mode:2
<189> Jul 31 02:01:50 192.168.40.53-1 DRIVER[124304596]: l7_usl_bcmx_port.c(3575) 1017 %% Failed to set green ether auto power down mode for gport 134219797, hwRv -16 dbRv 0
<189> Jul 31 02:01:50 192.168.40.53-2 DRIVER[123900524]: l7_usl_bcm_port.c(4228) 1016 %% Failed to set green ether auto power down mode for gport 21, rv -16 mode:2
<189> Jul 31 02:01:50 192.168.40.53-1 DRIVER[124304596]: l7_usl_bcmx_port.c(3575) 1015 %% Failed to set green ether auto power down mode for gport 134219796, hwRv -16 dbRv 0
<189> Jul 31 02:01:50 192.168.40.53-2 DRIVER[123900524]: l7_usl_bcm_port.c(4228) 1014 %% Failed to set green ether auto power down mode for gport 20, rv -16 mode:2
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 31st, 2018 12:00
Can you private message them to me?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 1st, 2018 05:00
It looks like green mode is interfering some. Can you please test disabling green mode.
no green-mode energy-detect
no green-mode eee
ramiro_alfredo
14 Posts
0
August 1st, 2018 06:00
in this output missing this info
#show interfaces status
Port Description Vlan Duplex Speed Neg Link Flow Ctrl
State Status
--------- ------------------------- ----- ------ ------- ---- ------ ---------
Gi2/0/1 5 N/A Unknown Auto Down Inactive
Gi2/0/2 5 N/A Unknown Auto Down Inactive
Gi2/0/3 5 N/A Unknown Auto Down Inactive
Gi2/0/4 5 N/A Unknown Auto Down Inactive
Gi2/0/5 5 N/A Unknown Auto Down Inactive
Gi2/0/6 5 N/A Unknown Auto Down Inactive
Gi2/0/7 5 N/A Unknown Auto Down Inactive
Gi2/0/8 5 N/A Unknown Auto Down Inactive
Gi2/0/9 5 N/A Unknown Auto Down Inactive
Gi2/0/10 5 N/A Unknown Auto Down Inactive
Gi2/0/11 5 N/A Unknown Auto Down Inactive
Gi2/0/12 5 N/A Unknown Auto Down Inactive
Gi2/0/13 5 N/A Unknown Auto Down Inactive
Gi2/0/14 5 N/A Unknown Auto Down Inactive
Gi2/0/15 5 N/A Unknown Auto Down Inactive
Gi2/0/16 5 N/A Unknown Auto Down Inactive
Gi2/0/17 5 N/A Unknown Auto Down Inactive
Gi2/0/18 5 N/A Unknown Auto Down Inactive
Gi2/0/19 5 N/A Unknown Auto Down Inactive
Gi2/0/20 5 N/A Unknown Auto Down Inactive
Gi2/0/21 5 N/A Unknown Auto Down Inactive
Gi2/0/22 5 N/A Unknown Auto Down Inactive
Gi2/0/23 5 Full 1000 Off Down Inactive
Gi2/0/24 5 Full 1000 Off Down Inactive
Te2/0/1 trnk Full 1000 Auto Up Inactive
Te2/0/2 trnk Full 1000 Auto Up Inactive
Tw2/0/1 N/A N/A N/A N/A Detach N/A
Tw2/0/2 N/A N/A N/A N/A Detach N/A
ramiro_alfredo
14 Posts
0
August 1st, 2018 06:00
ironically the green-mode is not configured in/on the interfaces
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 1st, 2018 06:00
I sent you a private message with my contact info. Hopefully we can gather some additional details and get this resolved.
ramiro_alfredo
14 Posts
0
August 1st, 2018 06:00
my mistake I don't fix the first post before
this is the complete output
maybe help to clear doubts
#show interfaces status
Port Description Vlan Duplex Speed Neg Link Flow Ctrl
State Status
--------- ------------------------- ----- ------ ------- ---- ------ ---------
Gi2/0/1 5 N/A Unknown Auto Down Inactive
Gi2/0/2 5 N/A Unknown Auto Down Inactive
Gi2/0/3 5 N/A Unknown Auto Down Inactive
Gi2/0/4 5 N/A Unknown Auto Down Inactive
Gi2/0/5 5 N/A Unknown Auto Down Inactive
Gi2/0/6 5 N/A Unknown Auto Down Inactive
Gi2/0/7 5 N/A Unknown Auto Down Inactive
Gi2/0/8 5 N/A Unknown Auto Down Inactive
Gi2/0/9 5 N/A Unknown Auto Down Inactive
Gi2/0/10 5 N/A Unknown Auto Down Inactive
Gi2/0/11 5 N/A Unknown Auto Down Inactive
Gi2/0/12 5 N/A Unknown Auto Down Inactive
Gi2/0/13 5 N/A Unknown Auto Down Inactive
Gi2/0/14 5 N/A Unknown Auto Down Inactive
Gi2/0/15 5 N/A Unknown Auto Down Inactive
Gi2/0/16 5 N/A Unknown Auto Down Inactive
Gi2/0/17 5 N/A Unknown Auto Down Inactive
Gi2/0/18 5 N/A Unknown Auto Down Inactive
Gi2/0/19 5 N/A Unknown Auto Down Inactive
Gi2/0/20 5 N/A Unknown Auto Down Inactive
Gi2/0/21 5 N/A Unknown Auto Down Inactive
Gi2/0/22 5 N/A Unknown Auto Down Inactive
Gi2/0/23 5 Full 1000 Off Down Inactive
Gi2/0/24 5 Full 1000 Off Down Inactive
Te2/0/1 trnk Full 1000 Auto Up Inactive
Te2/0/2 trnk Full 1000 Auto Up Inactive
Tw2/0/1 N/A N/A N/A N/A Detach N/A
Tw2/0/2 N/A N/A N/A N/A Detach N/A
ramiro_alfredo
14 Posts
0
August 1st, 2018 06:00
off course,
right now I can only hangout chat