Unsolved
This post is more than 5 years old
68 Posts
0
1298
N3048P Switch Discards
All my new 3048P switches are showing Received and transmit Discards
Why am I getting these and how do I stop them?
thks
Unsolved
This post is more than 5 years old
68 Posts
0
1298
All my new 3048P switches are showing Received and transmit Discards
Why am I getting these and how do I stop them?
thks
Top
Anonymous
274.2K Posts
0
January 20th, 2017 12:00
What firmware are these switches current on? Are these all ports? or just ports connected to specific devices?
What do the interface counters show? Is there anything recorded in the logs?
glenn77
68 Posts
0
January 26th, 2017 10:00
One other thing...on the 3048 ...the only discards are on the port connected to the 4032 switch
glenn77
68 Posts
0
January 26th, 2017 10:00
In one location I am using 2 N4032F with 6.3.1.8 and all the rest are N3048P using 6.2.6.6
All of the 3048s are connected to various devices (computers, Phones, Wireless APs, PA speaker/clocks and IP cameras)
the layout is... Sw-2 main floor is the uplink to our central location as well as LAG on 2 ports to the SW-3 2nd floor.
SW-2 has 7 3048s and one copper alarm connected to it
SW-3 has 7 3048s connected and No copper
SW-2 has Received Discards on all ports SW-3 has 0
Here are the errors the log file shows
Stats clear bcmCosqStatDroppedPackets anomaly -4 for [ifName not found(32)]
Stats clear bcmCosqStatDroppedBytes anomaly -4 for [ifName not found(32)]
These errors repeat for every up port
also when I web in I get these errors
Thks
Glenn