Powerconnect M6348 was working aok in one chassis, moved to another, the green light comes on at the back and never goes to blue/green.
Trying to get to the web Gui fails, even trying racadm from the m1000e and then going to the blade console doesnt come up. Unit is within guarantee, just wanted to exhaust all options before getting a replacement. I do not have the USB/Serial cable to hand (office move lost that) but to fix it, dont mind going down to maplin and buying USB/Serial cable.
Any thoughts? Should we try forcing a firmware upgrade to it, the problem is I do not know what release it is on in the first place 😞
An update to the above, from the CMC I see :
I/O Module C2 did not boot within the expected time.
I also can from racadm make the blue master like blink on and off (so it can talk to it at the very least).
I would start with start with simple things like re-seating the switch. Maybe try a different slot if available. You may also need to find that console cable, connect to the switch and see if it is stopping the boot process with any error messages.
Well I have tried a null modem cable as well as a StarTech FTDI USB to RS232 Serial Null Modem cable. Plugging this into a known working M6348 at 9600/N/8/1 and zip comes up on a working M6348.
I can buy one of those cables that you mentioned if you are sure it is the correct cable, ill need to get it from the UK mind you but will get it ordered.
If that doesnt work on the working M6348 - whats plan b?
In windows I used hyperterminal and zoc - I tested the cable conencting pins 2 and 3 and was getting echo'd back quite happily.
I am just about to try Linux and a terminal app to see if I get any further. The worrying this is, I get nothing back from the M6348 either the working or non working one.