Highlighted
miroslavp
1 Copper

Powerconnect 35xx management VLAN

Jump to solution

Is possible to set VLAN different from VLAN 1 as management VLAN on Powerconnect 35xx? I can't try it at the moment as I don't have the hardware.

I suppose this configuration:

console(config)#interface vlan 10
console(config-if)# ip address 192.168.10.123 255.255.255.0

Can someone who did it in reality confirm that it works?

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator

RE: Powerconnect 35xx management VLAN

Jump to solution

On most PowerConenct switches you would actually change the management VLAN using this command.

console(config)#ip address vlan 10

However the 35xx switches don’t have this command. The commands you outlined will assign an IP address to VLAN 10, and you should be able to use that IP address to access the web GUI to manage the switch.

Daniel Covey
Dell EMC| Enterprise Support Services
Get support on Twitter:@DellCaresPRO
Download our QRL app:iOS, Android, Windows
Dell Networking Resources

0 Kudos
5 Replies
Moderator
Moderator

RE: Powerconnect 35xx management VLAN

Jump to solution

On most PowerConenct switches you would actually change the management VLAN using this command.

console(config)#ip address vlan 10

However the 35xx switches don’t have this command. The commands you outlined will assign an IP address to VLAN 10, and you should be able to use that IP address to access the web GUI to manage the switch.

Daniel Covey
Dell EMC| Enterprise Support Services
Get support on Twitter:@DellCaresPRO
Download our QRL app:iOS, Android, Windows
Dell Networking Resources

0 Kudos
miroslavp
1 Copper

RE: Powerconnect 35xx management VLAN

Jump to solution

Hi Daniel,

Thanks for your reply.

Just for clarification... If I assign IP address to VLAN 10, I will be able to access the GUI through this address even though I can't use "ip address vlan 10" command? Right?

Can I access web GUI only or it works for Telnet/SSH/FTP etc. too?

Many thanks

0 Kudos
vwijhe
1 Nickel

RE: Powerconnect 35xx management VLAN

Jump to solution
It will work for alle the services including SSH and HTTPS. Just hit the IP address in the desired VLAN and set the ip default-gateway command on the global configuration if you want to manage it from another VLAN.
0 Kudos
miroslavp
1 Copper

RE: Powerconnect 35xx management VLAN

Jump to solution

OK, thank you.

0 Kudos
Moderator
Moderator

RE: Powerconnect 35xx management VLAN

Jump to solution

Correct, you will be able to Telnet, SSH to that IP address as well.

Daniel Covey
Dell EMC| Enterprise Support Services
Get support on Twitter:@DellCaresPRO
Download our QRL app:iOS, Android, Windows
Dell Networking Resources

0 Kudos