Highlighted
Not applicable

Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

Hello,

I have Powerconnect 5548 and 7480  switches and I would like to know if it's possible to backup config files with TFTP and SNMP commands, as I do with my cisco switches ?

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator

RE: Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

You should be able to use rlcopy which is OID .1.3.6.1.4.1.89.87

 

Rlcopy source location .1.3.6.1.4.1.89.87.2.1.3

Rlcopy desination ip address .1.3.6.1.4.1.89.87.2.1.9

 

The firmware updates also contain the mib files so you can find OIDs http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=JRCF6&fileId=3365034200&os...

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
4 Replies
Moderator
Moderator

RE: Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

Hi,

Yes you can backup the switches config files.

Copy startup-config tftp location

Page 130 http://downloads.dell.com/Manuals/Common/PowerConnect5500_CLIRef_en-us.pdf

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Not applicable

RE: Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

Maybe, I didn't express clearly my question, but  I would like  to do the same thing with snmpset commands.

I did it with my cisco switches but I don't know what are the good OIDs for Dell devices.

Thanks.

0 Kudos
Moderator
Moderator

RE: Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

You should be able to use rlcopy which is OID .1.3.6.1.4.1.89.87

 

Rlcopy source location .1.3.6.1.4.1.89.87.2.1.3

Rlcopy desination ip address .1.3.6.1.4.1.89.87.2.1.9

 

The firmware updates also contain the mib files so you can find OIDs http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=JRCF6&fileId=3365034200&os...

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Not applicable

RE: Powerconnect 5548, 7048 - SNMP configuration backup

Jump to solution

I tried these OIDs with  net-snmp :

1.3.6.1.4.1.89.87.2.1.3 i '1'

1.3.6.1.4.1.89.87.2.1.7 i '2'

1.3.6.1.4.1.89.87.2.1.8 i '3'

1.3.6.1.4.1.89.87.2.1.9 a '192.168.132.12'

1.3.6.1.4.1.89.87.2.1.11 s 'config.cfg'

1.3.6.1.4.1.89.87.2.1.16 i '1'

1.3.6.1.4.1.89.87.2.1.17 i '4'

The command with the string argument 'config.cfg' failed.

I am not  a specialist with SNMP, so I will try later with another snmp client.

Thank you.

0 Kudos