Kardeco
2 Bronze

Powerconnect 7048 stack witch SFP+ module

Jump to solution

I have 4 Powerconnect 7048 with SFP+ rear modules and the cables connected as in the official documentation, but I can't stack, always having the message Unassigned.

I did these steps:
en
conf
show switch stack-ports
stack
stack-port Tengigabitethernet X/1/1 stack
stack-port Tengigabitethernet X/1/2 stack
end
copy running-config startup-config
reload

How to make it work?

Thanksimage.pngimage.pngimage.png

0 Kudos
2 Solutions

Accepted Solutions

Re: Powerconnect 7048 stack witch SFP+ module

Jump to solution

Hi Kardeco,

Unfortunately, stacking is only supported on the CX-4 modules. Page 4 https://dell.to/3ufgqaT So you will need to use different modules from the SFP+ modules. Let us know if you have any additional questions.


Thanks,
DELL-Josh Cr
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
#IWork4Dell

View solution in original post

Re: Powerconnect 7048 stack witch SFP+ module

Jump to solution

The part number for the stacking module is RNDV3. The part number for long cables is 10XNR. The part number for short cables is HFT7J.


Thanks,
DELL-Josh Cr
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
#IWork4Dell

View solution in original post

0 Kudos
3 Replies

Re: Powerconnect 7048 stack witch SFP+ module

Jump to solution

Hi Kardeco,

Unfortunately, stacking is only supported on the CX-4 modules. Page 4 https://dell.to/3ufgqaT So you will need to use different modules from the SFP+ modules. Let us know if you have any additional questions.


Thanks,
DELL-Josh Cr
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
#IWork4Dell

View solution in original post

Kardeco
2 Bronze

Re: Powerconnect 7048 stack witch SFP+ module

Jump to solution

Thank you Josh.
Can you tell me the Part# of the CX4 and the cables (I need two short, and two long)?
Thanks

0 Kudos

Re: Powerconnect 7048 stack witch SFP+ module

Jump to solution

The part number for the stacking module is RNDV3. The part number for long cables is 10XNR. The part number for short cables is HFT7J.


Thanks,
DELL-Josh Cr
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
#IWork4Dell

View solution in original post

0 Kudos