Highlighted
Kahanlo
1 Copper

S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems

Jump to solution

I have multiple of these modules and can only get one (out of 5!) to work. Here is the interface config i am using
no ip address
switchport
no shutdown

If i plug any of the other four modules in the the same bay, they will not get a link light. The will show online in show sytem

-- Module 1 --
Status : online
Module Type : S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL)
Num Ports : 2
Hot Pluggable : yes

 

but no config will bring up a link light. I have set speeds to all available and negotion to all available. Surely i did not get 4 bad modules? Is there anything else i can do to troubleshoot?

0 Kudos
1 Solution

Accepted Solutions
Kahanlo
1 Copper

Re: S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems

Jump to solution

the switches all came with 9.14.2.2 and after a downgrade to 9.14.1.5 the uplink modules all get a link now

0 Kudos
3 Replies
Moderator
Moderator

Re: S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems

Jump to solution

Hi,

Are you rebooting after trying different modules? Have you tried them in multiple switches?

 

 

Thanks,
Josh Craig
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
0 Kudos
Kahanlo
1 Copper

Re: S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems

Jump to solution

yes, multiple reboots, 7 different switches

0 Kudos
Kahanlo
1 Copper

Re: S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems

Jump to solution

the switches all came with 9.14.2.2 and after a downgrade to 9.14.1.5 the uplink modules all get a link now

0 Kudos