I want know if anyone can help me with the OIDS for this switch, i can't find something about that really can help.
have some MIB Quick Reference link this?
Thans so much
Can someone, help me with the SNMP OIDS for monitoring this switch?
i want monitor the healty of the switches, I have 2 in stack, and I can't get the OIDS of this features of switches.
someone have a MIB Quick Reference, or something that can help?
Thanxs so much.
All MIBs and OIDS come zipped with the firmware download. Here are a few of the more popular OIDs for the N-Series
22.214.171.124.4.1.674.10895.5000.2.6126.96.36.199.1.4.1 (total free memory)
188.8.131.52.4.1.674.10895.5000.2.6184.108.40.206.1.4.2 (total memory)
220.127.116.11.4.1.674.10895.5000.2.618.104.22.168.1.4.3 (Table for the following...)
22.214.171.124.4.1.674.10895.5000.2.6126.96.36.199.188.8.131.52.2 (Name of process using CPU)
184.108.40.206.4.1.674.10895.5000.2.6220.127.116.11.18.104.22.168.2 (% of CPU used by corresponding process)
.22.214.171.124.4.1.674.10895.5000.2.6126.96.36.199.188.8.131.52 (rollup of all CPU activity)
184.108.40.206.4.1.674.10895.5000.2.6220.127.116.11.1.4.9 (shows 5 sec, 60 sec., and 300 sec)
OIDs for switch sensors:
Power Supply OIDs
To find other OIDs you should use the search utility in a good MIB browser. which should allow you to load all of the MIBs at once, browse through them in a ordered fashion, walk the MIBs, as well as search for keywords (RAM, memory, CPU, etc.) to easily find the required OIDs and information you need. Browsers will parse out each OID and descriptions for each, making them much easier to read than trying to use a text reader or word processor, and allow you to process all of the files at one time.
Hope this helps.
do you know where to download MIB file from ? I looking for mib files through the dell website but could not find it anywhere. I would like to get MIB file to monitor vlan traffic , cpu and memory. Can someone please help me out where to find the mib file for dell N4000 series.
The firmware download includes a ZIP file that contains all the MIBs. Here is a download link to the latest firmware.
Hope this helps.
the mib file format showing in the folder is .my file. It should be .mib file. Isn't it? I still cannot monitor my switch cpu and memory even I tried with correct OID? Can someone please help to reply.
Those ".my" files should be recognized and can be imported/browsed by most monitoring software. I am not very familiar with PRTG, but I can help ensure that the switch is responding to the OIDs. Have you tried polling/walking the OIDs on the switch? Can you provide further details of the OIDs you are trying to poll, the outcome/messages you receive, and any helpful screenshots.