Unsolved
8 Posts
0
1263
TACACS+ Web user access level
Hi.
I am deploy TACACS+ on my network.
The access by Telnet is work well, but when the TACACS+ user access the switch web interface receve the mensage:
"Please note that you are a level 1 user and do not have configuration privileges. This session is limited to read-only operations."
How can I permit that TACACS+ user have high privillege?
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 16th, 2020 17:00
Hi,
Which model switch is it?
RaphaelOliveira
8 Posts
0
June 17th, 2020 04:00
Hi, Josh.
The model is N2024P and N3024.
I did the tests just on Dell N2024P, I don't know if the model N3024 will show the same probleme.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 17th, 2020 09:00
You need to add it to that access line Page 256 https://dell.to/2USOk5g
RaphaelOliveira
8 Posts
0
June 18th, 2020 04:00
Hi.
Please, see the images below:
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 18th, 2020 09:00
Try adding it to https
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 18th, 2020 11:00
It works for SSH right?
RaphaelOliveira
8 Posts
0
June 18th, 2020 11:00
I tried https too.
But not solve.
RaphaelOliveira
8 Posts
0
June 22nd, 2020 04:00
Hi.
Today we work with Telnet, HTTP and HTTPS.
My problem is the web access, becouse the costumer don't have experience with CLI mode. So I nedd that TACACS+ user when to access by Web mode have the high privillege.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 22nd, 2020 09:00
Try setting a custom admin profile, page 312 https://dell.to/2Z0CgQO