Unsolved
This post is more than 5 years old
29 Posts
0
1809
Temperature State Change Alarm OID
Hi all,
I'm trying to set up monitoring of some N4000 series open manage switches on PRTG and I think I have found the OID's I need but..... The value for the OID's I have found include this :
Temperature state change alarm: Unit number1 current, normal, previous, warning
This is not ideal as I think it refers to the threshold value of 75 degrees C and i would prefer an alarm to generate at 55 degrees. I've read a few other posts related to this but the OID values given do not work for my switches.
Greatly appreciate any thoughts!
Kona153
29 Posts
0
October 28th, 2016 01:00
This might possibly help others:
I'm testing this at the moment:
"Name","Full Name","OID","Type","Access","Indexes","MIB Module","Description"
"envMonTemperatureRisingAlarm",".iso.org.dod.internet.private.enterprises.dell.dellLan.envMonTemperatureRisingAlarm",".1.3.6.1.4.1.674.10895.910",,,"","Dell-LAN-TRAP-MIB","Trap indicating that the temperature in the device has exceeded the device specific safe temperature threshold."