VandenTR
1 Copper

Update firmware on 6248 Stack?

Jump to solution

Guys,

Any idea why the tftp operation will only copy the 3.3.5.5 firmware to one of the two 6248's in the stack?

Thanks,

TVB

0 Kudos
1 Solution

Accepted Solutions
VandenTR
1 Copper

Re: Update firmware on 6248 Stack?

Jump to solution

Update: I went into the web interface and switched the Unit Type from "StackMember" to "Management" and after reconnecting, both units showed that the updated firmware version was loaded.



Now I just need to pull the trigger on the upgrade to 3.3.5.5!

6 Replies
Highlighted
VandenTR
1 Copper

Re: Update firmware on 6248 Stack?

Jump to solution

0 Kudos
Anonymous
Not applicable

Re: Update firmware on 6248 Stack?

Jump to solution

There was a similar forum post last year, but the forum user never updated with what they did to get things updated. I would schedule some time to break the stack. Update each switch individually and then once updated stack them back together.

Keep us updated.

0 Kudos
VandenTR
1 Copper

Re: Update firmware on 6248 Stack?

Jump to solution

Dan,

Can you provide the steps involved to break the stack before and restore it after the upgrade?

Thanks,

TVB

0 Kudos
Anonymous
Not applicable

Re: Update firmware on 6248 Stack?

Jump to solution

Here is a great white page on stacking the 6200, including adding and removing stack members.

www.dell.com/.../pwcnt_stacking_switches.pdf

Thanks

0 Kudos
VandenTR
1 Copper

Re: Update firmware on 6248 Stack?

Jump to solution

Update: I went into the web interface and switched the Unit Type from "StackMember" to "Management" and after reconnecting, both units showed that the updated firmware version was loaded.



Now I just need to pull the trigger on the upgrade to 3.3.5.5!

Anonymous
Not applicable

Re: Update firmware on 6248 Stack?

Jump to solution

Good detective work, I am glad you were able to get it working.

0 Kudos