I have access to the support site and get the latest firmware for the 4810 - but the release note suggests I need new boot code too u-boot.184.108.40.206.bin - but that does not appear in the list of available downloads. Where can I can that from ?
Solved! Go to Solution.
The u-boot image is built into the firmware download. You should just be able to run the update command in the release notes, and it will pull the uboot image from the firmware file.
What uboot version is the switch currently at?
After applying the image the current state is
Dell Networking OS Version : 9.11(2.0P0)
Boot Flash : 220.127.116.11
it appears to running fine and able to reload.
However, the release note states that version 18.104.22.168 is required and also gives no indication that the boot code is included.
Found it! Once you log into your force 10 account, scroll down to the bottom of the page.
"Note: To see the full list of Supported Software downloads, please click here"
Once you click the link you will be taken to a page with more links, and the uboot link is listed.