28 Posts
0
3654
What is the default hashing algorithm on S3048 with L2 LAG
#sh ver
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.13(0.1P1)
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
Build Time: Mon Mar 12 07:59:04 2018
Build Path: /build/build01/SW/SRC
Dell EMC Networking OS uptime is 16 week(s), 2 day(s), 8 hour(s), 14 minute(s)
System image file is "system://A"
System Type: S3048-ON
#show interfaces port-channel 47 b
Codes: L - LACP Port-channel
O - OpenFlow Controller Port-channel
A - Auto Port-channel
I - Internally Lagged
LAG Mode Status Uptime Ports
L 47 L2 up 01:40:08 Gi 1/47 (Up)
Gi 1/48 (Up)
show interfaces port-channel 47 does not show me that as well.
Thanks!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 11th, 2018 08:00
Default hashing is 0. You can change the hash algorithm with the command #hash-algorithm. The CLI guide details all the different options available to this command.
Page 601: https://dell.to/2Qmecmb
Hope this helps.
Joro Petrov
28 Posts
0
September 10th, 2018 09:00
show load-balance
Load-Balancing Configuration For LAG & ECMP:
--------------------------------------------
IPV4 Load Balancing Enabled
IPV4 FIELDS : source-ipv4 dest-ipv4 vlan protocol L4-source-port L4-dest-port
IPV6 Load Balancing Enabled
IPV6 FIELDS : source-ipv6 dest-ipv6 vlan protocol L4-source-port L4-dest-port
Mac Load Balancing Enabled
MAC FIELDS : source-mac dest-mac vlan ethertype
Load Balancing Configuration for tunnels
ipv4-over-ipv4 Payload header
ipv4-over-ipv6 Payload header
ipv6-over-ipv6 Payload header
ipv6-over-ipv4 Payload header
ipv4-over-gre-ipv4 Payload header
ipv6-over-gre-ipv4 Payload header
ipv4-over-gre-ipv6 Payload header
ipv6-over-gre-ipv6 Payload header
mac-in-mac header based hashing is disabled
TcpUdp Load Balancing Enabled