1 Rookie
•
107 Posts
0
1706
n1100 - cpld update from version 7 to 20?
Hi there,
do you know if I could/should update the cpld version of our N1100 switch?
#show version
Machine Description............... Dell EMC Networking Switch
System Model ID................... N1108P-ON
Machine Type...................... Dell EMC Networking N1108P-ON
HW Version........................ 3
CPLD Version...................... 7
Image File........................ N1100v6.7.1.1
Software Capability............... Stack Limit = 4, VLAN Limit = 512
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.7.1.1 6.4.1.4 6.7.1.1 6.7.1.1
If I initiate the command the switch tells me this:
#update cpld
This operation will reset the switch on completion. Are you sure you would like to update the CPLD? (y/n)
I guess with reset its meant will reload the switch.
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
October 21st, 2021 07:00
Sorry I just noticed the firmware update version I sent you is for N1108EP-ON instead of N1100.
So, it's ok. CPLD version 7 is the correct one for 6.7.1.1.
Regards.
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 18th, 2021 05:00
could it be that the last cpld is version 7
DELL-Marco B
Moderator
Moderator
•
3.4K Posts
0
October 18th, 2021 09:00
Hello,
the last CPLD version for this switch is 6.7.1.1.
And yes, reset in this case means reload of the switch.
Thanks
Marco
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 18th, 2021 22:00
Hi Marco,
thanks...regarding the firmware i know that this is the latest.
Regarding the CPLD it is currently on Version 7. Can you tell me if an update cpld would raise the version?
best wishes
DELL-Young E
Moderator
Moderator
•
3.6K Posts
0
October 19th, 2021 00:00
Hi, if I may as far as I know in order to get CPLD, you have to formally contact the local phone support with your service tag.
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 19th, 2021 02:00
Hey thanks for the reply.
Can you tell me if cpld version 7 is the latest on the N1100 Switches.
If it is there is no need for an update.
best wishes
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
1
October 19th, 2021 08:00
Hello @White_Ninja,
No, 7 is not the latest. As you can see in "Important Notes" of this download firmware file, it says at least CPLD vr13:
https://dell.to/2Z6AIc0
Regards,
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 21st, 2021 01:00
hi thanks,
thats for the update.
thats interesting...i did update cpld and the switch stayed with cpld version 7 after a reboot.
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
October 21st, 2021 05:00
Please, let me know, which firmware version do you currently have?
Regards.
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 21st, 2021 05:00
i am currently using 6.7.1.1
White_Ninja
1 Rookie
1 Rookie
•
107 Posts
0
October 22nd, 2021 00:00
alright thanks for the update...the riddle is solved