Unsolved
This post is more than 5 years old
1 Message
0
9240
two powerconnect 6248 VLAN Routing and Trunk-Port
Hello everybody,
I have two 6248. On the first switch I have configured VLAN 2-8. On the second switch I have configured VLAN 2 and 8. All VLANs are port-based VLANs. I have set the ip adresses on the VLAN interfaces and I have enabled globale routing and routing on the VLAN interfaces.
VLAN 8 is the connection between DSL Router and Firewall. The Firewall has two NICs VLAN8 / VLAN2.
See graphic:
http://img178.imageshack.us/img178/526/6248ap6.jpg
Now I want that VLAN 3-7 have only access to VLAN2. How can I set the routes? Because if i want to set the route i get an error. And how can i create the trunk port between the switches (SFP Module)?
Regards and thanks for help.
PS: I hope you understand my bad english :)
asidko
8 Posts
0
May 23rd, 2008 23:00
Hi Alex.
You network scheme is very close to my one.
Could you please show me your switch 6248 connected to the router by vlan8 configuration.
Please sent it to asidko@gmail.com
Thank you.