This post is more than 5 years old
7 Posts
0
1421
x1052p and vmware VLAN (VST Mode) - 1 Port, 2x VLAN
Hello Community,
I try to setup a esxi 6.0 with 2 VLANS (1-2) on one port of a x1052p and don't get it to work.
This is my setting in the esxi vswitch
They are conected to port 27 - I had to set it up as general. As soon as i switch to trunk - no traffic is passed further on the switch to my other vlan ports (access mode).
VLAN ID 2 is working but the machine on VLAN ID 1 is not seeing something.
Here is something maybe to help you:
Please guide me to light!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 18th, 2016 12:00
On the switch side:- Ensure the port is set to Trunk mode.
- Add all the VLANs and ensure they are set to T for tagged.
- Ensure no Native VLAN is being used.
On the server side, I would go back through the steps outlined here: http://bit.ly/2bpAwuZ
This will help ensure that the vSwitch is configured correctly to tag those VLANs.