1 Copper

Error 651

I have a new just out of the box Dell Studio PC with Windows 7 64 bit OS.

Unable to install a Netgear router model DGN2000 using the enclosed installation cd or the netgear installation web site  www.routerlogin.com. All I get is error code 651 when the router tries to connect to my internet server (att.net) Have tried installing router manually and using the automatic settings. No luck with either. Netgear and ATT are no help. Got cut off while on the phone with Dell techs today. Anybody have a solution? 

0 Kudos
17 Replies
1 Nickel

Re: Error 651

Wow made me work for this one.  Apparently this has been an issue and like normal micosoft is aware of it and is currently working on a solution in the meantime I went to many, many forums and they all tried a lot of stuff and none of it seemed to work...except this one from http://www.ehow.com/how_4815578_install-netgear-wireless-router-cd.html  he says to install it without using the cd to work around this issue, out of the billions and billions of forum threads I read this seems to be the only one that worked all the others said at the bottom that they tried what was suggested and is trying to contact att support...apparently with very little success which really isn't surprizing as they do acknowledge the issue and are currently working on a solution..sounds familar, eh?  Hope this works for your



    Manual Installation of the Netgear Wireless Router

  1. 1

    Turn off your computer and modem.

  2. 2

    Locate the Ethernet cord that runs from your modem to your computer. Unplug the end from your computer.

  3. 3

    Take the unplugged end and plug it into the Ethernet port on the back of the Netgear router.

  4. 4

    Plug the Ethernet cable that came with the router into the LAN 1 port on the back of the router. Plug the other end into the Ethernet port on the back of your PC, the same port you unplugged the Ethernet cable from in Step 2.

  5. 5

    Plug in the modem and turn the power on. Wait 2 minutes.

  6. 6

    Plug in the router. Wait another 2 minutes.

  7. 7

    Turn on your computer and check the lights on the front of the router. All four lights should be lit. If the third light is not lit, check the Ethernet connection from the router to the modem, making sure it is secure and the modem is turned on. If the fourth is not lit, check the Ethernet connection from the router to the PC, making sure the connection is secure and the computer is turned on.

    Connecting to and Setting up the Router

  8. 1

    Open your Internet browser and type "www.routerlogin.net" into the address bar.

  9. 2

    A login window will open and ask for a username and password. Enter "admin" for username and "password" for the password. This is the default setting for Netgear. If it does not work, check the paperwork that came with the router.

  10. 3

    Once you connect to the router, a setup wizard will open. This setup wizard will walk you through the final process of configuring your router.

Read more: How to Install a Netgear Wireless Router Without the CD | eHow.com http://www.ehow.com/how_4815578_install-netgear-wireless-router-cd.html#ixzz0zf7Nprfk

0 Kudos
1 Copper

RE: Error 651

Firstly, there are several reasons for the cause of error 651 and at the same time, there are different solutions for each of them. 

One of the ways to fix this error is IPv6 connection

Open Network and Sharing Centre and select your connection and click properties 

Uncheck Internet Protocol Version 6 (TCP/IPv6) and click Okay 

Restart your device and check if it fixed the issue. If not, check this guide to know other possible solutions

Fix Error 651 The modem has reported an error

Tags (2)
1 Copper

RE: Error 651

you can follow below tutorial.

8 methods to Fix error 651 easily

1 Copper

Re: Error 651

Error 651 occurs in windows operating system because of some network problem and specially when we try to establish internet connection using PPPoE connections or another related issue

apk Mod
facebook apk
spotify apk premium

0 Kudos
Arnold Smith
1 Copper

RE: Error 651

Thanks for sharing this awesome guide. Do you have any solution related to windows update. I have check this guide but still i am searching for another guide.

0 Kudos
1 Copper

Re: Error 651

You refer to the sites below.





0 Kudos
1 Copper

Re: Error 651

Have you tried checking if it's a WiFi Related issue?

0 Kudos
1 Copper

Re: Error 651

You can check the process of snes emulator here.

0 Kudos
1 Copper

Re: Error 651

To work around this issue, follow these steps:
Press the Windows logo Key+R to open the Run box.
Type regedit in the Run box, and then press Enter.
Locate and then select the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\<Device number>\Linkage
Note In this subkey, <Device number> is a placeholder for a 4-digit number that represents the ISDN device.
Right-click UpperBind, and then click Modify.
In the Value data box, type NdiscoWan, and then click OK.
Exit Registry Editor.

Those links are NOT allowed on this site. DCF Admin
0 Kudos