Unsolved
This post is more than 5 years old
5 Posts
0
27905
NETWORK ADAPTER MISSING IN INSPIRON 5110
SIR, I HAVE INSPIRON N5110 i-5 processor 2430M operating system window 7 i am not able to connect to internet through ethernet cable the following are the steps which i have taken when i am creating a new connection it is showing unable to create
Raghavendra1
4 Posts
0
June 11th, 2012 11:00
Hi gentleman101,
Welcome to Dell community Forum!
As i can understand that you are unable to go online wired.
From the screenshots i found that you have Windows 7 Operating System.
Please try the following steps in order to connect using a Ethernet cable in Windows 7 computer.
Click Start - Control panel - Network and Internet - Network and Sharing centre
On the left hand side of the screen, Click change adapter settings
You would see a LAN(Local area connection) icon.
1. Make sure the Local area connection(LAN) icon is enabled.
2. If not, Please right click and enable it.
3. Once enabled, Right click on Local area connection(LAN) and click connect.
3. a) If it is connected, Then try to go online and see if you get a valid IP address.
To check the IP address
Click Start -> in the small search box type "cmd" and press enter key
You would see a blank window with blinking cursor. Type "ipconfig" and press enter. See if you get a valid IP address. Eg : 192.168.2.10
b) If it is not connected, Then try to Disable and Enable the LAN icon and then try connecting to it by following the above mentioned steps.
In case if this step doesn't work, Please provide us the make of your modem, Router and name of your Internet service provider.
Raghavendra_BS
Certified Dell Community Professional
PudgyOne
9 Legend
9 Legend
•
30.3K Posts
0
June 11th, 2012 12:00
gentleman101,
Did you install/reinstall the operating system recently?
Can you run an ipconfig /all log and post it back here.
Rick
gentleman101
5 Posts
0
June 12th, 2012 02:00
sir i followed follows the steps mention by you it is showing no icon in adapter setting by
Click Start - Control panel - Network and Internet - Network and Sharing centre
On the left hand side of the screen, Click change adapter settings
You would see a LAN(Local area connection) icon
gentleman101
5 Posts
0
June 12th, 2012 02:00
sir please see the the reply
gentleman101
5 Posts
0
June 12th, 2012 02:00
PudgyOne
9 Legend
9 Legend
•
30.3K Posts
0
June 12th, 2012 11:00
gentleman101,
On all systems, when you hit the Windows key and the R keys at the same time, you'll see...
For XP, you have the type
command
For Vista/Windows 7, you have to type
cmd
Hit enter. Type
ipconfig /all
Hit enter
Right click at the top of the log, left click on edit, select all
Right click at the top of the log, left click on edit, copy
Then post the log back here.
Rick
Raghavendra1
4 Posts
0
June 13th, 2012 18:00
Hi gentleman101,
Welcome to Dell community Forum!
I believe there are no Drivers installed on your system. please click on the below link and download the drivers and install it on the Insp 5110 system and the system will be able to go online if not please check of IP Address with the above mentioned steps and respond here.
www.dell.com/.../DriverFileFormats
Raghavendra_BS
Certified Dell Community Professional
gentleman101
5 Posts
0
October 2nd, 2012 03:00
PudgyOne
9 Legend
9 Legend
•
30.3K Posts
0
October 2nd, 2012 10:00
gentleman101,
It's be a long time since you replied.
Try reding...
Winsock2 How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista This should also work for Windows 7.
How to reset There are two versions of Internet explrer on a 64-bit system.
Start, in search, type
internet
You should see...
Use the version that does NOT have (64-bit) after it.
Rick