This post is more than 5 years old
11 Posts
0
3186
Dell Networking x1052p
It seems like this particular model switch X1052P only has POE enabled from ports 1 - 24
Is there a way to enable POE on the rest of the ports 25-48?
Thank you
This post is more than 5 years old
11 Posts
0
3186
It seems like this particular model switch X1052P only has POE enabled from ports 1 - 24
Is there a way to enable POE on the rest of the ports 25-48?
Thank you
Top
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 17th, 2018 10:00
Unfortunately not, looking at the spec sheet it details that 24 ports offer PoE functionality on the X1052P.
"24 PoE/PoE+, up to 369W total (X1052P)"
http://dell.to/2m3Ispa
Are you needing all ports to offer PoE? Do any of the PoE devices offer PoE injectors?
jalmeida73
11 Posts
0
January 17th, 2018 11:00
I figured as much but just wanted to run it by the forum to make sure.
Power injectors will work just fine if I need to go beyond the first 24 ports.