This post is more than 5 years old
51 Posts
0
189905
uninstall vcenter plugin and start over
I was able to install and configure the virtual appliance and plugin but after using the upgrade feature of the virtual appliance, it would barely function and was getting memory errors so I thought I would just start over. Reinstalling the virtual appliance was easy but when I try to register it to a virtual center I get an error saying that there is already one registered to that virtual center. How do I remove it from vcenter so I can register my vceter with the virtual appliance?
Vikram_KV
20 Posts
1
January 11th, 2015 21:00
The method : "com.dell.plugin.Dell Management Plug-in" was applicable to appliance version 1.7 and below.
For versions after 2.0 and above, use the following steps :
1. Enter http:// /mob .
2. Select the content link.
3. Select the ExtendManager link.
4. Select the UnregisterExtendsion link.
5. Enter the extension key to unregister : " com.dell.plugin.OpenManage_Integration_for_VMware_vCenter_WebClient " and click InvokeMethod
6. Enter the extension key to unregister : " com.dell.plugin.OpenManage_Integration_for_VMware_vCenter " and click InvokeMethod
7. In the vSphere client, power off the plug-in appliance and delete it.
Thanks,
Vikram KV
swspjcd
51 Posts
0
April 25th, 2014 16:00
I found out what I needed to do. I used the following procedure to remove the plugin and then was able to reregister.
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1025360
DavidFertig
1 Message
0
December 30th, 2014 16:00
Hi MikeTheAdmin,
To remove the appliance if the Admin Portal cannot be used to unregister the appliance:
1 Go to https:// /mob
2 Click Content
3 Click ExtensionManager.
4 Click UnregisterExtension
5 Enter the extension key to unregister "com.dell.plugin.Dell Management Plug-in", then click Invoke method
6 In the vSphere client, power off the plug-in appliance and delete it
As for your SSL certificate issue, have you read this forum thread:en.community.dell.com/.../19977065.aspx
Regards,
KongY
phafandam357
1 Message
0
March 20th, 2021 07:00
Hello can you show how to manually show how to register the avamar plug in for vcenter. Everytime I install, it fails to register because the thumbprint is wrong. I went into the vcenter mob but dont know how to change just th thumbprint, Any help would be appreciated. Thanks Claude
DELL-Marco B
Moderator
Moderator
•
3.4K Posts
0
March 22nd, 2021 03:00
Hello,
maybe those documentations can help you
https://bit.ly/396sEdj
https://bit.ly/3vQL2QU
Thanks
Marco