microtech21
2 Bronze

Bios update

I ran SA to update drivers and bios. SA trying to jump from bios version A08 to A29. It has been stuck at 91% installation for about 24 hours now. Is this because it is jumping so many versions all at once? I do not want to stop the install or interrupt it because it can damage the bios. What should I do?

0 Kudos
2 Replies
Mary G
7 Thorium

Re: Bios update

You should not use SA to update bios. It cannot do it. It is just a recommendation that you must investigate, download and install yourself. Go to your download page to check if that is the correct bios for your model. Expand all the info about the update. Remember that an incorrect bios update can brick your computer.

You should have posted your exact model.

redxps630
5 Rhenium

Re: Bios update

Re: Is this because it is jumping so many versions all at once? I do not want to stop the install or interrupt it because it can damage the bios. What should I do?

Jumping over huge gap in bios version is not recommended.

there is nothing you can do other than wait, or bios may get corrupted and cmos bricked.


0 Kudos