Unsolved
This post is more than 5 years old
1 Message
0
18126
Server hardware installation
I would like to install 9 Dell power edge 2950 servers in a standard server cabinet, is there an installation guide that specifies maximum number, spacing, thermal loading etc.
Scott Hanson
342 Posts
0
February 4th, 2010 11:00
Our racks can support fully loaded with 2950's. You'll have to determine if your datacenter floor is capable of handling the weight. The Dell Datacenter Capacity Planner will give you an exact weight and power requirements from your exact config --> http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us&l=en&cs=555
Hope that helps.