FASILp8288
1 Copper

r320 server cpu over processing (100 %)

Dear, Power edge R320 Server getting too slow, when 15 + nodes connected.can you suggest any solution for this problem. CPU : Xeon e5-2407 memory : 16 gb ddr3 if i upgrade memory , the problem will solve?
0 Kudos
1 Reply

Re: r320 server cpu over processing (100 %)

Increasing memory won't resolve CPU utilization issues. You would need a faster processor for that. The other thing that you would want to double check is that the BIOS profile is set to Performance mode and that the BIOS and iDRAC are on the latest firmware. In the past, there were some issues with CPU C states that were corrected with firmware updates.

#Iwork4Dell
0 Kudos