博科300 断电后无法启动 hda1 hda2挂载失败

=>
=> boot
Map file at LBA sector 0xaab47
Blk map has an invalid version 2
Map file at LBA sector 0x1776b0
## Booting image at 00400000 ...
Image Name: Linux-2.6.14.2
Image Type: PowerPC Linux Multi-File Image (uncompressed)
Data Size: 4269595 Bytes = 4.1 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 3190918 Bytes = 3 MB
Image 1: 1078663 Bytes = 1 MB
## Current stack ends at 0x1FAEEA68 => set upper limit to 0x00C00000
## initrd at 0x0070B0D4 ... 0x0081265A (len=1078663=0x107587)
Loading Ramdisk to 1f9e6000, end 1faed587 ... OK
initrd_start = 1f9e6000, initrd_end = 1faed587
## Transferring control to Linux (at address 00000000) ...
Installing Linux 2.6 Kernel
Attempting to find a root file system on hda2...
mount: Mounting /dev/hda2 on /mnt failed: No such device or address
Failed to mount hda2 as root!
Attempting to find a root file system on hda1...
mount: Mounting /dev/hda1 on /mnt failed: No such device or address
Failed to mount hda1 as root!
Failed to mount a root file system!
Both boot devices are inconsistent. You can run sbin/repairfs.sh to boot up the system. After the system is booted up, please run firmwaredownload to load the appropriate version of firmware.

BusyBox v0.60.5 (2006.06.20-01:11+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off
#