Highlighted
Rameshchand
Copper

Plug & Play Configuration error during startup

Sir, I have DELL Power Edge 1800 when I start the server following error are showing Play and Play Configuration Error Subsystem : PCI Manager Error Type : PCI Device Initialization Bus#02/Dev#06/Func#0 : PCI Slot 1 please give some solution thanks
0 Kudos
1 Reply
Moderator
Moderator

Re: Plug & Play Configuration error during startup

According to your error, PCI slot 1 is the origin of this issue.

I would start by checking what device is installed on slot 1, and first just reseat it. If the issue continues then remove it and see if you still get the error. Depending on the card you could also try moving it to another slot, if one is available.

There is a diagram of the system board, showing where each slot is, on the link below.

<ADMIN NOTE: Broken link has been removed from this post by Dell>

Keep us informed.

Thanks.

Daniel Covey
Dell EMC| Enterprise Support Services
Get support on Twitter:@DellCaresPRO
Download our QRL app:iOS, Android, Windows
Dell Networking Resources

0 Kudos