Unsolved
This post is more than 5 years old
2 Posts
0
27455
Problem with Poweredge 2600 "NMI:Parity Check / Memory Parity error"
I'm having problem with power edge 2600 server. Service Tag
/ Express service code:
At this moment I have blue screen again with the next message:
Hardware Malfunction
Call your hardwarw vendor for support
NMI: Parity Check / Memory Parity error
The system has halted
Last time, I checked the Dell Open Manage Server Administration, ESM: Embedded System Management and the log page appear:
System Event - PCI Parity Error detected
System Event - PCI System Error
After that, I ran the the diagnostic check error, but all item is OK (CPU's, Power Supplies, Temperatute, FANs, memory, etc.)
I rebooted the server and was a normal operation, but today the error appeared again.
Can you help me to fix this Problem?
Thank's
Angel Mijangos
Mark_A_Smith
829 Posts
0
March 9th, 2006 12:00
Angel,
This is probably not something that you should try and troubleshoot in the forums. I just checked your service tag and you have six months left on your hardware warranty. I would suggest that you contact Dell to troubleshoot this problem.
NMI errors can be caused by any device that has access to the processor bus: Processor, memory, motherboard and controller cards. The most common cause is a controller card.