R710 Memory mix configuration 4GB & 8GB Module

Shkasim,

From what you are saying I assume it is Adv ECC mode. So A and B1, A and B4, and A and B7 are disabled. Now with adding the 8gb, are you planning on removing some of the 4gb to make space or are you wanting to just add the 8gb to the existing configuration?

Hi Chris

Thanks for your reply, yes it is Adv ECC mode with all memory bank full of Dimm with 4-GB Module.

Now I want to add RAM on A1 A4 A7 & B1 B4 B7 with 8-GB module on Optimizer mode.

My question is can I go for this solution..?

Again waiting for your reply

Asim

I also am trying to install additional memory into a R710. Our current configuration is 

A1: 8GB | A4: 8GB | A7: 4GB | A2: 8GB | A5: 8GB | A8: 4GB | A3: 8GB | A6: 8GB | A9: 4GB

B1: 8GB | B4: 8GB | B7: 4GB | B2: 8GB | B5: 8GB | B8: 4GB | B3: 8GB | B6: 8GB | B9: 4GB

What is odd is that this configuration works in one R710 but not in another. 

Any ideas or better practices to work with? 

Thanks,

Nate

Are both BIOS up to date?

I am currently running BIOS version 6.0.7 I called support and the tech seemed to think it was the Motherboard. They are coming out to swap it out tomorrow.

Turns out it was a bad motherboard and or processor. They swapped both out and now all three of my R710's are running 120GB in the above config