Unsolved
This post is more than 5 years old
1 Message
0
2176
Adding H310 to M620 - No Drives Detected
We have 2 M620 blades that used to be used for ESX, and did not have any installed PERC controllers or hard drives. We used SD cards for ESX install. The blades have the S110 integrated RAID controllers.
We want to re-purpose these servers and have purchased new PERC H310 mini controllers and 300GB hard drives. The blade sees the H310s, but it cannot see any harddrives.
I've cycled through all SATA modes, with no changes. Tried disabling the Integrated RAID, but this also disables the H310.
We've reseated everything multiple times, and are confident this is not the issue.
What am I missing?
DDH88
17 Posts
1
March 13th, 2018 12:00
Hi Matt,
You've correctly configured your unit to not use onboard RAID. Could you please configure the SATA mode to AHCI.
Also could you please confirm if you have a SATA or SAS backplane and are your drives SATA or SAS?
G. Natsoulis
6 Posts
0
September 3rd, 2021 05:00
Did you manage to find a solution?
I have the same problem with you so please share what you did.
Thank you!