Highlighted
2 Bronze

Dell PERC H710 Mini Embedded (Poweredge R410)

Jump to solution

Hi All, 

Recently purchase some addtional drives for my R420 which has a PERC H710 installed with 6GB SaS drives.

the drives which i have been supplied are  

HGST
Ultrastar C10K1800

which are 12G SaS drives.

i assume that these will function at the fastest level that controller can provide as the spec sheet from HGST just says 12G but always assumed SaS like SATA will  work with older controllers just at a lower speed.

thanks

0 Kudos
1 Solution

Accepted Solutions
Highlighted

RE: Dell PERC H710 Mini Embedded (Poweredge R410)

Jump to solution

Hello.

A common speed of  6GB/s will be negotiated as supported by the controller interface. I do see so that the PERC Seies-9 controllers support speed of 12GB/s.

Robert Alakara

Dell EMC | Enterprise Services

View solution in original post

2 Replies
Highlighted

RE: Dell PERC H710 Mini Embedded (Poweredge R410)

Jump to solution

Hello.

A common speed of  6GB/s will be negotiated as supported by the controller interface. I do see so that the PERC Seies-9 controllers support speed of 12GB/s.

Robert Alakara

Dell EMC | Enterprise Services

View solution in original post

Highlighted
2 Bronze

RE: Dell PERC H710 Mini Embedded (Poweredge R410)

Jump to solution

thanks for the clarification 🙂

0 Kudos