Stag82

2 Posts

105580

November 12th, 2015 06:00

Dell R730xd with H730 Mini and Non-RAID/HBA mode and W2016 Storage Spaces Direct

Hello.

We are evaluating Windows Server 2016 TP3 and Storage Spaces Direct.
We have following lab:

6 servers Dell R730xd with PERC H730 Mini
SEAGATE ST1200MM0088 SAS 1,2TBx12 drives per server
ATA INTEL SSDSC2BX20 SATA 200GBx2 drives per server
activated HBA mode on each PERC H730 Mini to get simple JBOD mode
disks shown in "Non-RAID" State and with SAS/SATA Bus Protocol in OMSA

Firmware/Driver Information for Controller PERC H730 Mini:
Firmware Version 25.3.0.0016
Driver Version 6.602.12.00
Storport Driver Version 10.0.10514.0

When we do Get-PhysicalDisk OS recognizes physical disks and their non-raid properties but BusType is still RAID.
RAID BusType doesn't let us to pass through "Storage Spaces Direct" Cluster validation test and get those drives for S2D pool creation until we set:

(Get-Cluster).DASModeBusTypes=0x100

This allows to create S2D Cluster but as Microsoft states changing DASModeBusTypes flag is for testing purposes only and not for production.

https://msdn.microsoft.com/en-us/library/windows/hardware/dn929502(v=vs.85).aspx

PS > Get-PhysicalDisk | Sort-Object FriendlyName | ft FriendlyName,HealthStatus,Size,BusType,MediaType

FriendlyName HealthStatus Size BusType MediaType

------------ ------------ ---- ------- ---------

ATA INTEL SSDSC2BX20 Healthy 199179108352 RAID SSD

SEAGATE ST1200MM0088 Healthy 1199369617408 RAID HDD

....

***********************************************************

Is there any problem with Storage Controller driver that it's still giving "RAID BusType" us instead of SAS/SATA of non-RAID disks? Does it mean we won't be able to use such design for production?

Thoughts?

Firmware Version	25.3.0.0016
Driver Version	6.602.12.00
Storport Driver Version	10.0.10514.0

Responses(5)

A

Anonymous

5 Practitioner

•

274.2K Posts

1

November 28th, 2016 11:00

Hello.

In Windows Server Storage Spaces direct, RAID controller cards will still been viewed in RAID status even after changing the operating mode to HBA. We recommend that you use exclusively supported HBA cards for the respective servers. P/N K6V6W for R930 and P/N 2PHG9 for R730XD

kpuchala

3 Posts

0

November 28th, 2016 11:00

It seems it should be a "PERC HBA330 12GB Controller Minicard" controller, not H330 or H730. But for testing I found, that this settings solves the issue:

(get-cluster).S2DBusTypes=”0x100″

After setting this parameter I was able to configure S2D Storage Pool on H730 controller.

PleXi00

1 Message

0

October 18th, 2016 05:00

Hello,

Same issue here. Perc is in HBA mode and disk are in non raid but windows still see bus type : RAID.

Regards,

kpuchala

3 Posts

0

November 28th, 2016 08:00

I have the same situation on R930 and H730. For now without any resolution. How to workaround this issue? How to use "(Get-Cluster).DASModeBusTypes=0x100" or "(Get-Cluster).S2DBusTypes=0x100"?

A

Anonymous

5 Practitioner

•

274.2K Posts

0

November 28th, 2016 12:00

Fantastic! Keep us posted on any other issues you might encounter.

View All

No Events found!

PowerEdge HDD/SCSI/RAID

Dell R730xd with H730 Mini and Non-RAID/HBA mode and W2016 Storage Spaces Direct