Unsolved
This post is more than 5 years old
1 Message
0
25801
Dell R810 Perc H200 to H700, retain raid or not?
Hey Everyone,
We are using a PowerEdge R810 with a Perc H200 controller with SSD's. We are upgrading to a Perc H700 card. I know that the drivers are similar, but I was wondering once we unplug the H200 and plug in the H700, will the H700 retain the H200 raid config, or will we have to redo the raid solution?
DELL-Geoff P
990 Posts
0
December 30th, 2013 14:00
Compatibility With Virtual Disks Created on PERC 6 and H200 Cards
Virtual disks that are created on the PERC 6 and H200 family of controllers
can be migrated to the PERC H700 and H800 cards without risking data
or configuration loss. Migrating virtual disks from the PERC H700 and
H800 cards to PERC 6 or H200 is not supported. Page 28: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/poweredge-rc-h700_User's%20Guide_en-us.pdf
Regards,