Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

K

Kaibin

3 Posts

11125

July 9th, 2007 01:00

Is there PERC 3/DCL driver for 64bits Windows Server 2003 available?

I continued receiving "The device, \Device\Scsi\mraid35x1, did not respond within the timeout period." error message and the server stop and bluescreen.
 
The disk is alright, I checked, after upgrading FW to 198U, the issue still existing, and Windows recognize it as PERC 3/DC, is that a the driver issue, is there 64bit driver for it?
 
Thank you.

lcf666

4 Posts

July 9th, 2007 12:00

Kaibin

3 Posts

July 10th, 2007 06:00

After upgrading FW to 199A, the issue still exists.
The driver looks like 32bit version, Is there a 64bit one for it?
 
Thanks...

DELL-GaryS

777 Posts

July 12th, 2007 21:00

Hi Kaibin,
 
  Could you help us out a bit and let us know which model of server you have the 3/DCL installed?
 
Regards,
Dell-GaryS

Kaibin

3 Posts

July 13th, 2007 00:00

It's on a non-DELL server, this server's RAID controller was damaged, so I un-plug it from my old DELL server.
 
Thanks

DELL-GaryS

777 Posts

July 13th, 2007 13:00

Hi Kaibin,
 
  The file you got for the driver was the one used on the PE2500, you might check other 5 series and 6 series servers to see if there is a different driver offered for the PERC3/DCL. if that does not work, you may need to go with a non dell driver.
 
http://www.lsi.com/support/technical_support/index.html  Give them the serial number so they can identify the model, you may need to put their F/W on the card as well.
 
Good luck,
Dell-GaryS

View More

View All

No Events found!

Top