I'm trying to add a new disk group to my R610 server already in production.
However I am facing a problem, when I do that I can't boot the system already in production (VMWare).
Returning to normal only when I remove the new group.
Solved! Go to Solution.
For clarification, are you saying that you are trying to create an additional RAID container and the server stops booting after, or are you describing a different issue?
If what I said is right, can you describe what process you're following to create the volume?
This is exactly my problem!
There is already a RAID created, but there is no more space on the disk, so I followed the standard steps to create a new volume
I enter RAID management mode
I create a new volume with the same RAID (1)
RAID management saved and closed
But after the new boot, my system does not start anymore
(returning to normal only when I delete the new volume)
It sounds like the boot order changed when adding another Virtual Disk(RAID) within the PERC. So go into BIOS and tell the system from which Virtual DISK you wanna start.
As can be seen in the image, I also tried this.
However, in the hard drive option, there appears to be only one RAID available for boot.
Is there any way around this or changing the attack in which the boot will take place?