Highlighted
trm201
1 Nickel

Non certified drives throwing Faults

Jump to solution

Hello,

We have a number of Dell blades running Perc h700 and Perc h710 cards.

Most of these are running Samsung 840 pro SSD drives, and Samsung 830 SSD drives - these drives are running perfectly fine, and simply show us as "non certified" and the array is "Non Critical", this causes no problems.

Now we've just installed some servers with the latest crucial 960GB SSD drives, and again it all works fine, but every time the machines boot it's reporting errors into the CMC log : 

  • Server 12 health changed to a critical state from either a normal or warning state.
  • Fault detected on drive 0 in disk drive bay 1
  • Fault detected on drive 1 in disk drive bay 1.

Does anyone have any idea why this might be happening?

Here are the omreports:

---
root@zeus :emotion-53:# omreport storage vdisk
List of Virtual Disks in the System

Controller PERC H710 Mini (Embedded)
ID                        : 0
Status                    : Ok
Name                      : Zeus
State                     : Ready
Hot Spare Policy violated : Not Assigned
Encrypted                 : Not Applicable
Layout                    : RAID-1
Size                      : 850.00 GB (912680550400 bytes)
Device Name               : /dev/sda
Bus Protocol              : SATA
Media                     : SSD
Read Policy               : Adaptive Read Ahead
Write Policy              : Write Back
Cache Policy              : Not Applicable
Stripe Element Size       : 64 KB
Disk Cache Policy         : Enabled

root@zeus :emotion-53:# omreport storage pdisk controller=0
List of Physical Disks on Controller PERC H710 Mini (Embedded)

Controller PERC H710 Mini (Embedded)
ID                        : 0:0
Status                    : Non-Critical
Name                      : Physical Disk 0:0
State                     : Online
Power Status              : Not Applicable
Bus Protocol              : SATA
Media                     : SSD
Device Life Remaining     : Not Applicable
Failure Predicted         : No
Revision                  : MU02
Driver Version            : Not Applicable
Model Number              : Not Applicable
Certified                 : No
Encryption Capable        : Yes
Encrypted                 : No
Progress                  : Not Applicable
Mirror Set ID             : Not Applicable
Capacity                  : 893.75 GB (959656755200 bytes)
Used RAID Disk Space      : 850.00 GB (912680550400 bytes)
Available RAID Disk Space : 43.75 GB (46976204800 bytes)
Hot Spare                 : No
Vendor ID                 : ATA
Product ID                : Crucial_CT960M500SSD1
Serial No.                : 1311092FA641
Part Number               : Not Available
Negotiated Speed          : 6.00 Gbps
Capable Speed             : 6.00 Gbps
Device Write Cache        : Not Applicable
Manufacture Day           : Not Available
Manufacture Week          : Not Available
Manufacture Year          : Not Available
SAS Address               : 4433221104000000

ID                        : 0:1
Status                    : Non-Critical
Name                      : Physical Disk 0:1
State                     : Online
Power Status              : Not Applicable
Bus Protocol              : SATA
Media                     : SSD
Device Life Remaining     : Not Applicable
Failure Predicted         : No
Revision                  : MU02
Driver Version            : Not Applicable
Model Number              : Not Applicable
Certified                 : No
Encryption Capable        : Yes
Encrypted                 : No
Progress                  : Not Applicable
Mirror Set ID             : Not Applicable
Capacity                  : 893.75 GB (959656755200 bytes)
Used RAID Disk Space      : 850.00 GB (912680550400 bytes)
Available RAID Disk Space : 43.75 GB (46976204800 bytes)
Hot Spare                 : No
Vendor ID                 : ATA
Product ID                : Crucial_CT960M500SSD1
Serial No.                : 1311092FA619
Part Number               : Not Available
Negotiated Speed          : 6.00 Gbps
Capable Speed             : 6.00 Gbps
Device Write Cache        : Not Applicable
Manufacture Day           : Not Available
Manufacture Week          : Not Available
Manufacture Year          : Not Available
SAS Address               : 4433221105000000

root@zeus :emotion-53:# omreport storage controller
 Controller  PERC H710 Mini (Embedded)

Controllers
ID                                            : 0
Status                                        : Ok
Name                                          : PERC H710 Mini
Slot ID                                       : Embedded
State                                         : Ready
Firmware Version                              : 21.2.0-0007
Latest Available Firmware Version             : Not Applicable
Driver Version                                : 06.504.01.00-rh1
Minimum Required Driver Version               : Not Applicable
Storport Driver Version                       : Not Applicable
Minimum Required Storport Driver Version      : Not Applicable
Number of Connectors                          : 1
Rebuild Rate                                  : 30%
BGI Rate                                      : 30%
Check Consistency Rate                        : 30%
Reconstruct Rate                              : 30%
Alarm State                                   : Not Applicable
Cluster Mode                                  : Not Applicable
SCSI Initiator ID                             : Not Applicable
Cache Memory Size                             : 512 MB
Patrol Read Mode                              : Auto
Patrol Read State                             : Stopped
Patrol Read Rate                              : 30%
Patrol Read Iterations                        : 9
Abort Check Consistency on Error              : Disabled
Allow Revertible Hot Spare and Replace Member : Enabled
Load Balance                                  : Not Applicable
Auto Replace Member on Predictive Failure     : Disabled
Redundant Path view                           : Not Applicable
CacheCade Capable                             : Yes
Persistent Hot Spare                          : Disabled
Encryption Capable                            : Yes
Encryption Key Present                        : No
Encryption Mode                               : None
Preserved Cache                               : No
Spin Down Unconfigured Drives                 : Disabled
Spin Down Hot Spares                          : Disabled
Spin Down Configured Drives                   : Disabled
Automatic Disk Power Saving (Idle C)          : Disabled
Time Interval for Spin Down (in Minutes)      : Not Applicable
Start Time (HH:MM)                            : Not Applicable
---
0 Kudos
2 Solutions

Accepted Solutions
Moderator
Moderator

Re: Non certified drives throwing Faults

Jump to solution

The error comes from being a non Dell certified drive.  The drive will function normally, but the firmware mismatch will return the error.  

Regards,

Geoff P
Dell | Social Outreach Services - Enterprise


Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device!
(iOS, Android, Windows)

0 Kudos
kathirvel1980
1 Copper

RE: Non certified drives throwing Faults

Jump to solution
ID 0:1:0
Status OK
Name Physical Disk 0:1:0
State Online
Power Status Spun Up
Bus Protocol SAS
Media HDD
Failure Predicted No
Revision ES66
T10 PI Capable No
Certified Yes
Capacity 278.88GB
Used RAID Disk Space 278.88GB
Available RAID Disk Space 0.00GB
Hot Spare No
Vendor ID DELL(tm)
Product ID ST3300657SS
Serial No. 6SJ7Z4GE
Part Number CN0F617N7262242P00KTA03
Negotiated Speed 6.00 Gbps
Capable Speed 6.00 Gbps
Sector Size 512B
Manufacture Day 04
Manufacture Week 09
Manufacture Year 2014
SAS Address 5000C50071FF6E6D
 
ID 0:1:1
Status Non-Critical
Name Physical Disk 0:1:1
State Online
Power Status Spun Up
Bus Protocol SAS
Media HDD
Failure Predicted Yes
Revision VT31
T10 PI Capable No
Certified Yes
Capacity 278.88GB
Used RAID Disk Space 278.88GB
Available RAID Disk Space 0.00GB
Hot Spare No
Vendor ID DELL(tm)
Product ID ST300MP0005
Serial No. S7K1DY6V
Part Number CN07FJW47262268500E6A00
Negotiated Speed 6.00 Gbps
Capable Speed 6.00 Gbps
Sector Size 512B
Manufacture Day 07
Manufacture Week 31
Manufacture Year 2016
SAS Address 5000C500982B5651

0 Kudos
35 Replies
Moderator
Moderator

Re: Non certified drives throwing Faults

Jump to solution

The error comes from being a non Dell certified drive.  The drive will function normally, but the firmware mismatch will return the error.  

Regards,

Geoff P
Dell | Social Outreach Services - Enterprise


Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device!
(iOS, Android, Windows)

0 Kudos
trm201
1 Nickel

Re: Non certified drives throwing Faults

Jump to solution

I understand that the drives will show as Non-Critical as they are no supported, however that's not my problem here. I'm saying that on Boot the CMC is reporting the drives are Faulty with these new Crucial Drives. This does not happen with the Samsung drives, which are also not supported.

0 Kudos
Moderator
Moderator

Re: Non certified drives throwing Faults

Jump to solution

The firmware mismatch is most likely the cause of the fault.  From Crucial's site, it shows these drives are for PC's and MAC's, and doesn't show any enterprise support for the drive.  I would contact Crucial and find out if they have tested these drives on Dell's server platforms.  

Regards,

Geoff P
Dell | Social Outreach Services - Enterprise


Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device!
(iOS, Android, Windows)

0 Kudos
tommo666
3 Zinc

Re: Non certified drives throwing Faults

Jump to solution

This is a raid controller issue, Dell programs firmware with the disk headers from all supported drives. The controller shows the correct info for each connected disk. If the disk is un-supported then it doesn't mean it won't work but that it hasn't been tested or qualified for that controller and the header not entered in the firmware.

Your SSD is working fine, it's the controller reporting it.Doesn't know what's on the end of the cable so chucks up an error. I have seen a whole rack of 2950's with ssd's all showing red led faults but really all working ok.

As to the difference between samsung and crucial, well they are different manufacturers and probably different controller/firmware. So behave differently.

0 Kudos
Trickery
1 Copper

Re: Non certified drives throwing Faults

Jump to solution

Is there a way to disable alerts for those particular SSDs? I'm having the same exact issue.

0 Kudos
theflash1932
5 Iridium

Re: Non certified drives throwing Faults

Jump to solution

No, what the controller logs is not changeable.

0 Kudos
accenttek
1 Copper

Re: Non certified drives throwing Faults

Jump to solution

Did you ever find a work around or fix for this?

We are having a similar problem using OCZ Talos 2 R (Enterprise Grade) drives. The error notices on the drives would bother us, but our concern is that the iDRAC won't notify us if a drive actually does fail since it reports them as failed all the time even though they are fully functional.

0 Kudos
czeetah
1 Nickel

Re: Non certified drives throwing Faults

Jump to solution

Samr problem here with the 840's

Sent them back and bought Intel 530's

0 Kudos
czeetah
1 Nickel

Re: Non certified drives throwing Faults

Jump to solution

Contacted Samsung and their reply was "call Dell."

0 Kudos