jacole
1 Nickel

PE2400 removing unused drives

Hi,
I have a PE2400 with 6 drives on Perc2/Si controller running Linux.
I want to remove two without interfering with the others.
The current config is:
Executing: container list
Num Total Oth Chunk Scsi Partition
Label Type Size Ctr Size Usage B:ID:L OffsetSmiley Frustratedize
----- ------ ------ --- ------ ------- ------ -------------
0 Mirror 8.47GB Valid 0:00:0 64.0KB:8.47GB
/dev/sda 50039132 0:01:0 64.0KB:8.47GB

1 Volume 33.9GB Valid 0:02:0 64.0KB:33.9GB
/dev/sdb 50048304

2 Volume 68.0GB Valid 0:03:0 64.0KB:68.0GB
/dev/sdc 3EK0HLBC

3 Mirror 136GB Valid 0:04:0 64.0KB: 136GB
/dev/sdd 3HY0B900_V2EX 0:05:0 64.0KB: 136GB

Numbers 1 and 2 are to be removed. Clearly NUM 3 should remain
/dev/sdd. If I don't move the drives in NUM 3 will they stay
as /dev/sdd?
Thanks,
Jim Cole
0 Kudos