Unsolved
This post is more than 5 years old
1 Message
0
686
PowerEdge 2900 with SAS 6/iR server 2008 R2 enterprise raid rebuild issue
PowerEdge 2900 with SAS 6/iR with server 2008 r2
server administrator alert there was a hard drive in pre failure condition.
Shut down the server, replaced the hard drive with a known good one. Turned on server, boot into windows, checked with server administrator and found the raid is in rebuild status.
two weeks later, started server administrator again and found the raid status was still in rebuild status with 0% complete.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 7th, 2017 10:00
Hello.
Check to make sure that the replaced drive is Dell certified and is well fitted. May you provide some screen shots for more information and make sure the controller firmware, BIOS and BMC is up to date.