Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

is this file not the same as the 4 sep above?

mirrors.vbi.vt.edu/.../om650_suu_a00.iso

0 Kudos
theflash1932
6 Indium

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

Might be the same file, but it is not a Dell download ... be wary of non-Dell downloads (even if it is an EDU ... EDU sites are not always monitored internally).

Actually, it is not the same ... that link is for 6.5.0 ... the one I linked is 6.5.3 ... sometimes those x.x.something sub-versions can be for only a small number of systems, so while 6.5.0 might work, it might only be for a few systems (perhaps not even for a 2950).

0 Kudos
Highlighted
Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

SUU 6.5.3 supports the following PowerEdge systems running the supported

Linux and Windows operating systems:

R710, R610, T610, T710, R410, M710, M610, T410, 810, R510, T310, T110,

R910, R210, R815, R310, M910, R715, M610x, R515, R415, M710HD, R210,

M915, T110

800, 850, 830, 860, 840, M605, R200, M600, R900, T105, R805, R905, T605,

R300, T300, T100, M905, M805,

6950, 1955, PE2950, 1950, 2900, 1900, 2970,

6800, 6850, 2850, 1800, 800, 1850, 2800, 1855, SC1425,SC1435

i try too find the 6.5.0 see if my pe2950 is listed in that version

0 Kudos
Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

when i Previous Version i only get these??

Previous Versions

7.2.1, A01 6/14/2013 8:50:13 PM

7.1.1, A00 10/19/2012 5:59:39 AM

7.0.0, A00

0 Kudos
theflash1932
6 Indium

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

The 2850(?) and the 2950 are both listed for 6.5.0:

www.dell.com/.../DriverDetails

0 Kudos
Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

mistyped i mean PE2950

0 Kudos
Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

nice i download that version - it contain the lasted updates firmware and driver that work under windows 2003 x64

File Format: ISO Image Download File Download File

Add To My Download List Add to My Download List

File Name: cdu_1.6_core_173_A01.iso

Description: This file contains an ISO image used to create a CDROM. Download the file to a folder on your hard drive, then create a CD using your preferred CD burning software.

Download Type: HTTP

File Size: 1299MB

0 Kudos
Bushimoo
1 Nickel

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution

could u provide der same driver for 2003 x86? link?

0 Kudos
theflash1932
6 Indium

Re: PowerEdge 2950 with PERC 6/i - issue under install no hdd found

Jump to solution
0 Kudos