Unsolved
This post is more than 5 years old
5 Posts
0
25183
Raid-1 Replaced/rebuilt drive shows status "Ready"
I have an old PowerEdge 6600. Last night it auto-restarted after a blue screen error and was showing a failed drive in the system array, disk 0.0
Usually when this happens, I go into ArrayManager, replace the drive and it rebuilds to "Online" status. Easy-pezy.
This morning, I replaced the failed drive, and once the rebuilding finished, the status shows "ready" and there is only one disk listed under my "Virtual Disk" that is online, disk 0.1
I do not think my array is being mirrored properly. Does anyone have an idea of what may have gone wrong and maybe a suggestion on how to best get the second drive back to "Online?"
Thanks,
Andy
Anonymous
274.2K Posts
0
March 21st, 2016 12:00
In progress..........
DELL-Josh Cr
Moderator
Moderator
•
8.4K Posts
0
March 21st, 2016 12:00
Hi,
Are you able to set the drive to a hotspare in array manager? This might force it to rebuild.