This post is more than 5 years old
1 Message
0
18801
SSD Options for R710 with Perc H700
We have an R710 server with Perc H700 Raid controller and 3-1/2" Near-line SAS 6Gps hard drives. We are looking to upgrade the aging hard drives with SSDs, and would like info on which SSDs are compatible with this system. Service Tag for this system is: HMHVPQ1.
-Jerry
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 19th, 2017 16:00
Hello.
Here are some compatible SSDs. P/N DPF1J for 2.5" 800 GB SAS SSD and P/N R2PJ7 for 2.5" 400 GB SAS SSD. You may need to use 3.5" HD carrier already shipped to match the backplane.
thq1981
1 Message
0
April 23rd, 2017 10:00
What about SATA SSD, is there any?
Like Kingston suggests DC400 to be compatible with PowerEdge R710, sizes: 480GB, 960GB, 1600GB?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 25th, 2017 08:00
The server does support 2.5" SSD SATA hard drives as well such as P/N 9T0ND 800GB SSD, SATA, 2.5" and P/N 6XJ05 for 400GB SSD, SATA, 2.5". You may have to look up compatibility information for other SATA SSD drives.
Thank you.
IB-EN1
13 Posts
1
June 15th, 2017 05:00
Hello,
I have a new setup with Kingstone DC400 960GB SEDC400S37 drives installed on a R710 with H700 card.
All drives are showing "non-critical" state.
OMSA and H700 versions are at the latest.
Any ideas how to resolve this?
Thank you
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
June 15th, 2017 17:00
Get certified drives. Non-certified drives may not properly communicate their status, so the controller cannot vouch that they are healthy.
IB-EN1
13 Posts
1
June 17th, 2017 22:00
The state currently showing is the yellow exclamation and "non-critical": will I be alerted should one of the drives fail? or is this the only state with a non-compatible drive?
edit: pulling a drive out does show a notification on the hardware status monitoring.
so, when using a non-compatible driver, what are the effects?
Thx
SOLOWEBMEXICO
1 Message
0
April 4th, 2019 04:00