Unsolved
1 Message
0
741
Storage upgrade with SSD and RAM - PowerEdge R530
Hi ,
We upgrade our inhouse server with 16GB of RAM (total 32GB) and SSD
- DELL OEM 480GB 2.5" SATA SSD Assembled Kit 3.5” 11-13G
- DELL OEM 16GB DDR4 2666M RDIMM ECC Dual rank
Server already have 2 dell discs in RAID1 setup , this is 3rd disk that can be in RAID0
We install all hardware and over vmware i can see 32GB of RAM but no available storage.
When i try to install new VM available storage shows only from RAID1 setup.
Any tips and tuts ?
Tnx
Dell-DylanJ
2.9K Posts
0
December 17th, 2019 08:00
You most likely need to create a virtual disk. If all you added was the SSD for storage, then you'll need a single disk RAID 0, which would then be passed through to VMware. The iDRAC web interface would likely be the easiest place to do this.